Head printer ink-jet printer is the part that is important. He is a working tool for the print image to print media.

Printer vendors now create many types of head, namely, a printer head which is the one with the ink cartridge and a separate head with the ink cartridge.

I will not explain to you, the advantage of a function and a separate one. To function as the printer head is over, I will explain at another time.

I will only explain. What makes your head quickly broken printer? Many causes the printer to make your head broken. And the fact that you are most damaging to head ink-jet printer you own the property.

Some of the causes that make head ink-jet printer you quickly broken;

1. Use ink that is not original
2. Use the printer non-stop
3. Not use the printer in a long time

I will explain;

Use ink that is not original

Use ink that is not original, will accelerate the damage-head ink jet printer you. Why is that? Because the ink is not genuine, is a bulk product that is not devoted to a particular type of printer. Vendor ink does not make the original, only in outline only. For example, ink is compatible with this printer. But there is no guarantee that the printer is compatible with the ink-jet owned by you.

Unlike the original ink that is only in a specific brand and type for a specific printer and can not be used in other brands printers. Original ink was made according to the characters the printer itself. It is planned to start from the ink dot size, the capillary system printer. And usually contains anti-fungus.

Ink is not genuine is not made in detail as the original ink. And not to design the size of dot. If the ink dot size does not fit will make the dead-head ink jet printer you.

Use the printer non-stop

Although you use the original ink. Not to head the security ink-jet printer you will be safe from damage. The use of non-stop, will make a lot of iron head printer you hot quickly. Result in expansion, which makes for smooth ink does not print. Clogged head and speed ink-jet printer you.

Not use the printer in a long time

Mistakes most people thought. By not using your printer for a long time, will create a durable ink-jet printer you belong. And save the ink.

That’s not true. If you do not use ink-jet printer you belong in a long time. Will make your printer ink clot. Make the printer head and ink-jet belonging to you quickly become clogged.

Conclusion.

Use the printer ink-jet ink with your original, and use as often as possible and do not use non-stop. Give time a break of up to 1 hour. Hopefully your printer is durable and you can use forever.

In addition to the ink refill, which can damage the printer is humidity in the room inkjet printer that is caused by the remaining ink is removed in the bottom of the printer with media-sponge absorber. If the printer used to print, the printer into exile because of wet ink and the humid conditions, fungus, and eventually cause corrosion can cause the printer components made of iron and the age cut-use printer.

So that the age-use Epson printers more durable, it’s been opened since the first channel ink residue disposal (waste-ink) directly exit the printer body. So that does not make a sponge to absorb ink resulted in a wet and humid. And the regular waste-ink counter reset in software by using the appropriate type of inkjet printer, so that the printer can still be used permanently.

Here is the procedure to create the necessary channels disposal:

3 Piece Tools and Materials needed:

1. Plus large screwdriver and a small minus screwdriver.
2. Small plastic bottle that is easily tied to the printer body.
3. Wire to bind or rubber waste-ink bottle to the printer body.

B. Procedure remove Casing and Install The Ink Bottle:

1. Release 2 piece screw on the back of the printer.

2. Remove the lock casing on the right side of the body and left the printer, using a small minus screwdriver, the lever toward the outside.

3. Press to the outside, lock the casing in the back of the paper feeder. There are 4 pieces hook fastener. Be careful not to fracture. Then slide to the front of the printer, remove the hook for fastening the front of the printer casing.

4. Remove the hose line out to the ink-Absorber Sponge, as in the following picture: As should be free, to be able to be outside the body.

5. Prepare the ink bottle plastic container remaining. Clean, if you use bottles used. Cut-out plastic bottle nosel page, so that the hose out in the ink can freely insert into the bottle cap page. Fasten a small wire rack in the printer body to the left of the back (see picture)

6. Replace the printer casing body along with the insert-lapse waste ink right on the top of the plastic bottles. be dilated slightly ventilation grille printer, so that the lapse of the wall and the ink does not easily flow out.

7. Insert the tip of the hose into a plastic bottle cap, such as in the picture. Try Head Cleaning. Some of the ink remaining in the pump to be in plastic bottles.